O2 Air; Gas Flow Rate - TESTO 320 Instruction Manual

6 Using the product
6.2.11.

O2 air

✓ An O2 dual wall clearance probe (0632 1260) must be
connected.
Call up function:
> [
Carrying out the measurement:
1. Start measurement:
- The measured value is displayed.
2. End measurement:
Options:
> [Options]
> [Options]
is deleted.
> [Options]
6.2.12.

Gas flow rate

The function is only available if the chosen fuel is a gas.
Call up function:
> [
Carrying out the measurement:
1. Make a note of the gas meter value.
2. Start measurement:
3. When the adjusted gas flow is reached:
- The calculated gas flow rate and the gas burner capacity (in
kW) are displayed.
Options:
> [Options]
> [Options]
is deleted.
> [Options]
> [Options]
> [Options]
changed
52
→
] Measurement options
[
[
→ Clipboard: data is saved to the clipboard.
→
Delete
→ Save: the measured values are saved in a record.
→
] Measurement options
[
→ Clipboard: data is saved to the clipboard.
→
Delete
→ Save: the measured values are saved in a record.
→
Enter Gas
→
Change
(m3 > l or l >
→
[OK]
].
].
clipboard: any data saved to the clipboard
→
[OK]
].
clipboard: any data saved to the clipboard
Flow: set the gas flow value.
unit: The unit for the gas flow can be
m3).
→ → [OK].
O2air
→ → [OK].
Flowrate
[ ].