Connecting Probes / Sensors - TESTO 330-1G Instruction Manual

1.800.561.8187 1.800.561.8187
5 First steps
5.2.2.

Connecting probes / sensors

Probe/sensor detection at the flue gas socket is carried out
continuously. New probes are recognised automatically.
Connect a probe to the probe socket before switching on
the measuring instrument or start sensor detection
manually after changing the probe:
detection.
Connecting flue gas probes / gas pressure adapters /
temperature adapters
> Insert the connector plug into the flue gas socket and lock by
slightly turning it clockwise (bayonet lock).
There must be no more than one extension lead (0554
1201) between measuring instrument and flue gas probe.
Connecting other sensors
> Insert the connector plug of the probe into the probe socket.
30
www. www.
[Options]
information@itm.com information@itm.com
.com .com
→ Sensor