Gas Flow; Oil Flow - TESTO 330 Instruction Manual

6.2.10.
6.2.11.
d Quality Products Online at:

Gas flow

The function is only available if the chosen fuel is a gas.
Calling up the function:
> [ ] → Measurements
Performing the measurement:
1. Start measurement:
- The measuring duration is displayed.
2. When the adjusted gas flow is reached:
- The calculated gas flow and the gas burner capacity (in kW) are
displayed.
Options:
> [Options] → Clipboard: Data are saved to the clipboard.
> [Options] → Delete
is deleted.
> [Options] → Save: The readings are saved in a protocol.
> [Options] → Enter heating
> [Options] → Units
duration and GasPgr can be changed.

Oil flow

The function is only available if the chosen fuel is an oil.
Calling up the function:
> [ ] → Measurements
Performing the measurement:
1. Select the parameters
Pressure (no effect on calculation): [▲],
2. Enter values. [▲],
- The calculated oil burner capacity (in kW) is displayed.
Options:
> [Options] → Clipboard: Data are saved to the clipboard
> [Options] → Delete
is deleted.
> [Options] → Save: The readings are saved in a protocol.
[Options] Unit
> →
changed (kg/h > gal/h
GlobalTestSupply
www.
→ [OK] → Gas
[ ].
clipboard: Any data saved to the clipboard
value: heating value can be set.
setting: the unit for gas flow, heating value,
→ [OK] → Oil Flow
Oil Flow (of the oil nozzle) and
[▼] and partly [◄], [►]→ [OK].
clipboard: Any data saved to the clipboard
settings: The unit for the oil flow can be
or gal/h > kg/h).
6 Using the product
Flow→ [OK].
[ ].
→ [OK].
Oil
[▼] → [Edit].
59
.com
sales@GlobalTestSupply.c