Flue Gas - TESTO 330-1G Instruction Manual

1.800.561.8187 1.800.561.8187
6 Using the product
6.2.2.

Flue gas

To achieve usable measurement results, the measurement
period of a flue gas measurement should be approx. 3 min
and the measuring instrument should display stable
measured values.
Calling up the function:
1. [ ] → Measurements
2. Select the fuel → [OK].
Performing the measurement:
1. Start measurement:
If a separate measurement of CO undiluted has not yet
been carried out, this value is calculated using the readings
of the flue gas probe and is updated continuously.
If CO undiluted has already been measured separately, the
value obtained is adopted.
- The readings are displayed.
> [Options] →
The draught measurement option is only available if the
measurement parameter
display.
- Draught measurement zeroing
- Draught measurement begins automatically
> Hold the draught measurement value displayed:
- The measurement stops automatically.
- The readings are automatically displayed and saved in a record.
Option
Restart the draught measurement:
2. Quit measurement:
Options
> [Options] → Clipboard: Data are saved to the clipboard
> [Options] →
is deleted.
> [Options] → Save: The readings are saved in a record.
> [Options] →
form of a line graph.
52
www. www.
→ [OK] → Flue Gas
[ ].
Draught measure start/stop
Draught is enabled in the reading
[Drgt start]
[ ].
Delete clipboard: Any data saved to the clipboard
Show Graphic: The readings are displayed in
.com .com
→ [OK].
[Drgt stop]
information@itm.com information@itm.com