Table of Contents
Advertisement
1.800.561.8187
1.800.561.8187
5.2.7.
Printing / saving data
Data are printed out via the function key
Data are saved via the menu Options. The menu
accessed via the left function key and is available in many different
menus.
Assignment of the right function key with the function
Print, see Assigning the right function key page 39 .
Only measuring values, which have a display field in the
measurement view assigned, will be saved / printed out.
The measurement data can be printed out parallel to the
saving process, while a measurement program is running.
To be able to transmit data via infrared or Bluetooth interface to a
report printer, the printer to be used must have been activated, see
Activating the printer:, page 43.
5.2.8.
Remembering data (clipboard)
With the help of the clipboard measuring results from various
measurement types can be combined to a common record, which
can then be printed out (see above). Data are saved to the
clipboard via the menu
If there are data in the clipboard, the status bar shows the symbol
.
If there are data in the clipboard and the command
triggered, all data in the clipboard will be printed out.
Only one set of measuring data can be recorded per measurement
type (e.g.
Flue Gas
one measurement type overwrites the previously saved data. When
changing the measurement place or the fuel, the clipboard is
deleted.
5.2.9.
Confirming an error message
If an error occurs, an error message is shown in the display.
> Confirming an error message: [OK].
Errors which have occurred and have not yet been rectified are
indicated by a warning symbol (
Not yet rectified error messages can be displayed in the menu
Error
Diagnosis, see Instrument diagnosis, page 37.
www.
www.
[
]
or the menu Options.
Options
and the command Clipboard.
or Draught). Repetitive saving of test data of
) in the header.
.com
.com
5 First steps
Options
is
Save
or
Print
is
33
information@itm.com
information@itm.com
Advertisement
Table of Contents
