SFP Slot LED
Each SFP slot has one LED. Refer to Figure 24.
The SFP slot LED is described in Table 11.
Table 10. 10/100/1000Base-TX Port LEDs (Continued)
LED
State
DPX
Off
Solid green
SFP Slot LEDs
Note
The last two SFP slots on the AT-FS980M/28, AT-FS980M/28PS,
AT-FS980M/28DP, AT-FS980M/52, and AT-FS980M/52PS switches
can be used as stacking ports. When an SFP slot is used as a
stacking port, the LED indicates the status of the link for stacking.
LED
State
Link/
Off
Activity
Solid green
Flashing green
FS980M Series Fast Ehternet Managed Switches Installation Guide
Description
The port is operating in half-duplex mode,
or the switch is in the power saving mode.
The port is operating in full-duplex mode.
Figure 24. SFP Slot LEDs
Table 11. SFP Slot LED
The SFP slot is empty, the SFP
module has not established a link to a
network device, or the switch is in the
power saving mode..
The port has established a link at
1000Mbps speed.
The port is receiving or transmitting
frames at 1000Mbps speed.
SFP Slot
LED
Description
39