At-Fs980M/52Ps Switch - Allied Telesis AT-FS980M/28DP Installation Manual

Fast ethernet managed switches
Table of Contents

Advertisement

Chapter 1: Overview
AT-FS980M/
52PS Switch
20
Warning
Power cord is used as a disconnection device. To de-energize
equipment, disconnect the power cord.  E3
The AT-FS980M/52PS switch is equipped with:
48 10/100Mbps twisted pair ports including 24 PoE+ supported
ports
4 SFP slots
1 console port
Note
Two SFP slots can be used as stacking ports. For more information,
see "Stacking Ports" on page 21.
See Figure 17 for the port layout of the AT-FS980M/52PS switch.
Figure 17. AT-FS980M/52PS Switch Front Panel
The AT-FS980M/52PS switch has an internal power supply with a single
AC power supply socket on the rear panel as shown in Figure 18.
Figure 18. AT-FS980M/52PS Switch Rear Panel
A retainer clip is included in the accessory kit. To install the retainer clip,
see "Powering On the Switch" on page 66.
10/100Base-TX
PoE Ports
SFP Slots
Console Port

Advertisement

Table of Contents
loading

Table of Contents