Table of Contents
Advertisement
Chapter 1: Overview
AT-FS980M/18
Switch
14
Warning
Power cord is used as a disconnection device. To de-energize
equipment, disconnect the power cord. E3
The AT-FS980M/18 switch is equipped with:
16 10/100Mbps twisted pair ports
2 10/100/1000Mbps twisted pair ports (Combo ports)
2 SFP slots (Combo ports)
1 console port
Note
The 10/100/1000Mbps twisted pair ports and SFP slots form two
pairs of combo ports. For more information, see "Combo Ports" on
page 31.
See Figure 5 for the port layout of the AT-FS980M/18 switch.
10/100Base-TX
Figure 5. AT-FS980M/18 Switch Front Panel
The AT-FS980M/18 switch has an internal power supply with a single AC
power supply socket on the rear panel as shown in Figure 6.
Figure 6. AT-FS980M/18 Switch Rear Panel
A retainer clip is included in the accessory kit. To install the retainer clip,
see "Powering On the Switch" on page 66.
10/100/1000Base-TX
Ports
Ports
Console Port
SFP slots
Advertisement
Table of Contents
