Allied Telesis AT-FS980M/28DP Installation Manual page 53

Figure 27. Attaching the Brackets to the Switch
3. Go to the following step:
For the AT-FS980M/9, AT-FS980M/9PS, and AT-FS980M/18
�
switches, go to Step 6.
These switches are not required to attach rubber feet.
For the AT-FS980M/18PS, AT-FS980M/28, and AT-FS980M/52
�
switches, go to Step 4.
You must attach two rubber feet to fill the gap between the switch
and the wall for these switches.
4. Flip over the switch.
5. Attach two rubber feet at the corners where the brackets are not
installed. See Figure 28.
Figure 28. Attaching the Rubber Feet
FS980M Series Fast Ethernet Managed Switches Installation Guide
53