Table of Contents
Advertisement
Chapter 1: Overview
AT-FS980M/28
Switch
16
Warning
Power cord is used as a disconnection device. To de-energize
equipment, disconnect the power cord. E3
The AT-FS980M/28 switch is equipped with:
24 10/100Mbps twisted pair ports
4 SFP slots
1 console port
Note
Two SFP slots can be used as stacking ports. For more information,
see "Stacking Ports" on page 21.
See Figure 9 for the port layout of the AT-FS980M/28 switch.
Figure 9. AT-FS980M/28 Switch Front Panel
The AT-FS980M/28 switch has an internal power supply with a single AC
power supply socket on the rear panel as shown in Figure 10.
Figure 10. AT-FS980M/28 Switch Rear Panel
A retainer clip is included in the accessory kit. To install the retainer clip,
see "Powering On the Switch" on page 66.
Warning
Power cord is used as a disconnection device. To de-energize
equipment, disconnect the power cord. E3
10/100Base-TX
Ports
SFP Slots
Console Port
Advertisement
Table of Contents
