Table of Contents
Advertisement
AT-FS980M/
The AT-FS980M/28PS switch is equipped with:
28PS Switch
See Figure 11 for the port layout of the AT-FS980M/28PS switch.
The AT-FS980M/28PS switch has an internal power supply with a single
AC power supply socket on the rear panel as shown in Figure 12.
A retainer clip is included in the accessory kit. To install the retainer clip,
see "Powering On the Switch" on page 66.
24 PoE+ supported 10/100Mbps twisted pair ports
4 SFP slots
1 console port
Note
Two SFP slots can be used as stacking ports. For more information,
see "Stacking Ports" on page 21.
Figure 11. AT-FS980M/28PS Switch Front Panel
Figure 12. AT-FS980M/28PS Switch Rear Panel
Warning
Power cord is used as a disconnection device. To de-energize
equipment, disconnect the power cord. E3
FS980M Series Fast Ehternet Managed Switches Installation Guide
10/100Base-TX
PoE Ports
SFP Slots
Console Port
17
Advertisement
Table of Contents
