Default Settings - Buffalo LinkStation 200 Series User Manual

Chapter 11 Appendix
Code
I52
I54
Amber (Glowing)
When the power LED glows a steady amber, a new firmware version is available. Update the firmware to the newest
version.

Default Settings

Administrator's Name
Password
Shared Folders
IP Address
Registered Groups
Microsoft Network Group Settings
Ethernet Frame Size
SMB
AFP
FTP
WebAccess
RAID Scanning
DLNA Server
iTunes Server
Print Server
BitTorrent
Time Machine
Direct Copy
NTP
Description
A new firmware version has been released.
The backup job failed.
admin
password
"share" and "info" for both Windows and Mac computers.
*
*The recycle bin is enabled by default.
The LinkStation will get its IP address automatically from a DHCP server
on the network. If no DHCP server is available, then an IP address will be
assigned as follows:
IP Address: 169.254.xxx.xxx ("xxx" is a number randomly assigned when
booting the LinkStation.)
Subnet Mask: 255.255.0.0
"hdusers", "admin", and "guest"
You cannot edit or delete these default groups.
WORKGROUP
1500 bytes
Enabled
SMB Protocol
Exclude Mac OS
temp files from
recycle bin
Disabled
Disabled
Disabled
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
Enabled
Corrective Action
Update the firmware by referring to the
"Updating the Firmware"
8.
Make sure that the backup job is
configured correctly. Make sure that the
backup target NAS device is on and not in
standby mode. If the backup job still fails,
check the status of the network, as well as
the backup source and destination.
Switch between SMB2 and SMB1 automatically
Yes
130
section in chapter