To transfer logs
1
Click Edit.
2
Enable "Syslog Transfer".
3
Enter the IP address of the syslog server where you want to transfer the logs to.
4
Select the type of log that you want to transfer from "Logs to Transfer".
5
Click OK.
Note: FTP logs cannot be written to a syslog server.
To create a link to the logs in the shared folder
1
Click Edit.
2
Enable "Share Link to Logs".
3
Select the shared folder where the link will be created in "Target Shared Folder".
4
Click OK.
Under the selected shared folder, a folder named "system_log" will now contain the logs.
Updating the Firmware
If a new firmware is available, a message is displayed when the TeraStation boots. You can update the firmware by
following ways:
185