Table of Contents
Advertisement
Procedure
1
To set the function of the QuickCapture button on the side of the P5000i, toggle the Test Button
soft key and select the option from the following choices:
–
Test: Sets the capture button to function as Test. Pressing the Quickcapture button
analyzes fiber image as like the Test soft key on your JD700B series.
–
Freeze: Sets the capture button to function as Freeze. Pressing the Quickcapture button
captures fiber image as like the Freeze soft key on your JD700B series.
2
To turn the auto center feature on or off, toggle the Auto Center soft key between On and Off
and select the option you want to set. Default setting is On. It automatically displays the center of
the fiber when viewing at high magnification.
Performing fiber inspection
Capturing fiber image
Procedure
1
Connect the fiber to be inspected to the tip of your microscope P5000i.
The live image of the fiber is displayed on the screen.
See the user manual of your fiber microscope for details on using the P5000i.
2
Focus the image by rotating the Focus Control on the P5000i until the image is in focus.
3
Toggle the Magnification soft key between Low and High and select the option you want to use.
You can also press the Magnification Control button on either side of the P5000i.
4
Press the Freeze soft key to capture the properly focused image.
The text "Capturing..." appears.
5
Optional. To save the captured image as a file (.png), complete the following steps:
a
Tap the Save PNG soft key.
The Save window appears with the on-screen key.
b
Type a file name in the File Name field.
c
Select a folder where you want to save the file, if desired.
d
Press the Save soft key.
6
Press the Live soft key to return to the live image screen or press the Quit soft key to exit.
JD700B Series User's Guide
Chapter 18 Performing Fiber Inspection
521
Advertisement
Table of Contents
