Table of Contents
Advertisement
Figure 5
Spectrum measurement screen
Connecting a cable
There are two ways that you can make a connection of your instrument and the base station to be
tested: direct or indirect.
Procedure
To make a direct connection:
1
Connect the Spectrum Analyzer RF In port of the JD700B series and the PA output port of BTS
as shown in Figure 6.
To make an indirect connection:
1
Connect the Spectrum Analyzer RF In port of the JD700B series and the monitor (test) port of
BTS as shown in Figure 7.
Figure 6
Direct connection
JD785B/JD786B/JD745B/JD746B
JD700B Series User's Guide
Chapter 4 Using Spectrum Analyzer
JD788B/JD748B
53
Advertisement
Table of Contents
