Table of Contents
Advertisement
Running IP test
You can test an Internet Protocol (IP) configuration of the cell site's backhaul.
Procedure
1
Press the SYSTEM hot key.
2
Select More (1/2) > Utility > IP Test.
3
Select the command option, from the following choices:
–
To display the route and measure transit delays of packets, toggle the Commands soft key
and select Traceroute.
–
To display the reachability and measure the round-trip time, toggle the Commands soft key
and select Ping.
4
To set the destination IP address to be tested, complete the following steps:
a
Press the Destination IP soft key.
b
Press the First Octal soft key.
c
Enter a value, and then press the Enter soft key.
d
Press the Second Octal soft key and repeat step c.
e
Press the Third Octal soft key and repeat step c.
f
Press the Fourth Octal soft key and repeat step c.
5
Press the Execute soft key and select Start to start testing.
Test result is displayed on the screen as the test is progressing.
6
Press the Execute soft key and select Stop to stop testing.
7
Optional. Press the Save soft key to save the test result as a .txt file type.
Activating StrataSync
StrataSync is a cloud-based solution that provides asset, configuration, and test data management for
JDSU instruments. StrataSync manages and tracks test instruments, collects and analyzes results
from the entire network, and informs and trains the workforce.
The JD700B series is compatible with the JDSU StrataSync cloud. This optional capability allows you
to manage your instrument inventory ensuring you know where all your valuable equipment is and
which engineer is using it. In addition, it allows you to keep your instruments current through the
remote upgrade capability that ensures all instruments have the latest firmware. It also enables the
centralized distribution of configuration settings to ensure all your engineers use the same instrument
settings resulting in consistent measurements.
Once testing is completed, the trace files can be uploaded onto StrataSync for secure storage and
sharing. This sharing capability allows engineers who have a problem they cannot resolve to request
help from an expert who can analyze the trace file via StrataSync using applications such as JDViewer,
JDFileViewer, JDPowerMeter, etc. from anywhere without having to be at the instrument, helping
resolve problems even faster.
Setting up Internet connection
Your JD700B series instrument must have an access to the Internet to be able to connect to the
StrataSync. You can connect the Ethernet network to the RJ45 port of your instrument. You can also
use your mobile device's data network such as the Bluetooth tethering on an Android-based
smartphone and the Personal Hotspot on an iOS-based smartphone. If you want to share your
JD700B Series User's Guide
Chapter 2 Getting Started
43
Advertisement
Table of Contents
