Chapter 10 Using CDMA Signal Analyzer
Figure 150 SEM measurement with CDMA signal analyzer
NOTE
You can use the LIMIT hot key to analyze your measurements with the user-definable
limit and Pass/Fail indication. See "Setting limit for RF tests" on page 310 for more
information.
ACPR
The Adjacent Channel Power Ratio (ACPR) is defined as the ratio of the average power in the
adjacent frequency channel (or offset) to the average power in the transmitted frequency channel. It
may be expressed as the ratio of the integrated signal power in the adjacent channel to the integrated
signal power in the main channel.
After configuring test parameters as described in the "Configuring test parameters" on page 297, your
measurement result is displayed on the screen as like the following example, Figure 151.
Figure 151 ACPR measurement with CDMA signal analyzer
306
JD700B Series User's Guide