Chapter 8 Using LTE - FDD Signal Analyzer
Measurement example
Figure 99
Carrier aggregation measurement with LTE - FDD signal analyzer (MA)
Figure 100 Carrier aggregation measurement with LTE - FDD signal analyzer (SA)
NOTE
You can use the LIMIT hot key to analyze your measurements with the user-definable
limit and Pass/Fail indication. See "Setting limit for modulation tests" on page 206 for
more information.
Using marker
You can use the MARKER hard key to place the marker at a specific channel.
Procedure
1
Press the MARKER hard key.
216
JD700B Series User's Guide