Chapter 9 Using LTE - TDD Signal Analyzer
Measurement example
Figure 125 Control channel measurement with LTE - TDD signal analyzer
Figure 126 Control channel measurement with LTE - TDD signal analyzer (MBMS On)
NOTE
You can use the LIMIT hot key to analyze your measurements with the user-definable
limit and Pass/Fail indication. See "Setting limit for modulation tests" on page 268 for
more information.
Using marker
You can use the MARKER hard key to place a marker on a resource block and display the IQ diagram
for the selected resource block.
Procedure
1
Press the MARKER hard key.
260
JD700B Series User's Guide