6-19. AIR PRESSURE
SWITCHES
Nov. 2009
The vacuum switch senses the flow of air coming from the
blower. If the airflow is reduced below a set amount, the switch
cuts power to the control valve, which shuts the burners down.
Replacement:
To avoid electrical shock or property damage, move the
power switch to OFF and disconnect main circuit breaker,
or unplug cord at wall receptacle.
1. Air switches are located on the rear of the fryer. Using a
Phillip's-Head screwdriver, remove the 2 screws securing
the outer cover and remove cover.
2. Label and pull wires from switch.
3. Pull tube from switch and using a Phillip's-Head screw-
driver, remove the 2 screws securing the switch to the
bracket and remove switch.
4. Install new switch in reverse order and restore power to
unit.
6-21
Model EEG-142, 143, 144