Blower Motor - Henny Penny Evolution Elite EEG-142 Technical Manual

6-16. BLOWER MOTORS
Nov. 2009
The blower motor assembly creates the draft for the burners. If
the blower motor fails, the air switch fails to close, causing an
"E-20B" error code in the display.
Replacement
To avoid electrical shock or property damage, move the
power switch to OFF and disconnect main circuit breaker,
or unplug cord at wall receptacle.
1. Remove the bottom, rear panel.
2. Using a 3/8" socket or nut driver, remove the nuts securing
the blower brackets to the fryer.
3. Remove the brackets from the blower.
4. Remove the pressure tube from the blower.
5. Locate and cut wires and remove blower from unit.
6. Connect the new blower motor wires to the fryer using wire
nuts, and install the new blower motor in reverse order as
above.
Before installing the bottom, rear cover, clean the blower in-
take slots to ensure sufficient air flow to the blowers.
6-18
Model EEG-142, 143, 144