Drain Pan Switch - Henny Penny Evolution Elite EEG-142 Technical Manual

6-17. DRAIN PAN SWITCH

Nov. 2009
This switch closes when the drain pan is pushed properly in
place under the fryer. If the drain pan is not properly in place,
or the drain switch is faulty, display prompts such as,
PAN"; "FILTER PAN MISSING"; "CHANGE FILTER PAD"
shows in the display.
Removal:
1. Drain pan switch is located on the rear of the fryer. Using
a 3/8" socket or nut driver, remove the nuts securing the
drain switch bracket to the fryer.
2. Using a 1/8" Allen wrench, remove the shoulder bolt se-
curing the cover and remove cover.
3. Using a Phillips-Head screwdriver, remove the screws
securing the switch to the bracket and remove switch from
bracket.
4. Label and remove wires from switch
Checkout:
5. Check for continuity across the normally open and the
common terminals of the drain switch. The circuit should
show open and when the plunger is pressed, show closed.
Replace switch if faulty, placing wires on new switch on
the normally open and common terminals.
Normally
Closed
Normally
Open
6-19
Model EEG-142, 143, 144
"CHECK
Common