Section 2. Info & Filter Button Stats; Info Button Stats; Filter Button Stats - Henny Penny Evolution Elite EEG-142 Technical Manual

2-1. INFO BUTTON STATS

2-2. FILTER BUTTON STATS

Nov. 2009
SECTION 2. INFO & FILTER BUTTON STATS
Actual Oil Temperature
1. Press
display, for each vat.
Set-point Temperature
1. Press
the set-point (preset) temperature of each vat.
Recovery Information for each Vat
1. Press
the recovery time that oil temperature went from 250°F
(121°C) to 300°F (149°C) shows in the right display. For
example, "REC 5:30" means it took 5 minutes and 30
seconds for the oil temperature to recover to 300°F (149°C)
from 250°F (121°C).
Cook Cycles Remaining before Filtering
1. Press and release either
shows "COOKSREMAINING" and the right display shows
the number of cook cycles before the next auto filter. For
example. "REMAINING" "3" "6" means after 3 more cook
cycles on the left vat, the controls asks the operator if they
are ready to filter or not. But, 6 more cook cycles remain
on the right vat.
Time and Date
2. Press either
diplays, along with the time-of-day and date of the last
filter.
and the actual oil temperature shows in the
twice and SP shows in the display, along with
3 times and REC shows in the left display and
If no buttons are pressed within 5 seconds in
any of stats modes, the controls revert back to
normal operation.
twice and 'FILTERED" shows in the
2-1
Model EEG-142, 143, 144
button and the left display