Air Pressure Switches - Henny Penny Wendy’s Evolution Elite EEG-153 Service Manual

6-19. AIR PRESSURE
SWITCHES
May 2012
The vacuum switch senses the flow of air coming from the blower.
If the airflow is reduced below a set amount, the switch cuts power
to the control valve, which shuts the burners down.
Replacement:
To avoid electrical shock or property damage, move the
power switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle.
1. Air switches are located on the rear of the fryer. Using a
Phillip's-Head screwdriver, remove the 2 screws securing the
outer cover and remove cover.
2. Label and pull wires from switch.
3. Pull tube from switch and using a Phillip's-Head screwdriver,
remove the 2 screws securing the switch to the bracket and
remove switch.
4. Install new switch in reverse order and restore power to unit.
6-21
Model EEG-153, 154