Clock Set; Data Logging, Heat Control, Tech, Stat & Filter Control Modes - Henny Penny Evolution Elite EEG-142 Technical Manual

5-2. CLOCK SET

5-3. DATA LOGGING, HEAT
CONTROL, TECH, STAT,
AND FILTER CONTROL
MODES
Nov. 2009
1. Press and hold the
2", followed by, "SP PROG" and "ENTER CODE" show in
the display.
2. Press the button 2 times and "CLK SET" and "ENTER
CODE" flash in the left display.
3. Enter code 1, 2, 3 (first 3 product buttons).
4. "CS-1 ENTER DATE MM-DD-YY" flashes in the left
display. Use the product buttons to set the date in the right
display.
5. Press ► button and "CS-2 ENTER TIME" flashes in the
left display and the time flashes in the right display. Press
the ▲ or ▼ , or use product buttons, to change the time.
6. Press ► button and "CS-2 ENTER TIME" flashes in the
left display and "AM" or "PM" flashes in the right display.
Use the ▲ or ▼ buttons to choose AM or PM.
7. Press ► button and "CS-3 TIME FORMAT" flashes in the
left display and "12-HR" or "24-HR" shows in the right
display.Use the ▲ or ▼ buttons to choose a 12 hour time
format or a 24 hour time format.
8. Press ► button and "CS-4 DAYLIGHT SAVING TIME"
flashes in the left display. Use the ▲ or ▼ buttons to
choose daylight saving time for your area:1.OFF; 2.US
(2007 & after); 3.EURO; or 4.FSA (US before 2007).
The Data Logging, Heat Control, Tech, Stat and Filter Control
Modes are advanced diagnostic and program modes, mainly for
Henny Penny use only. For more information on these modes,
contact the Service Department at 1-800-417-8405 or 1-937-
456-8405.
5-10
Model EEG-142, 143, 144
button for 5 seconds until "LEVEL