Din Rail Mounting - HMS Networks Anybus Communicator User Manual

DIN Rail Mounting

6.2. DIN Rail Mounting
IMPORTANT
The equipment must be electrically grounded through the DIN rail for EMC compliance. Make sure
that the equipment is correctly mounted on the rail and that the rail is properly grounded.
IMPORTANT
To physically secure networks and equipment and to prevent unauthorized access, it is
recommended to install the equipment in a locked environment.
Figure 8. Attach the Communicator on the DIN rail
To attach the Communicator on the DIN rail:
1. Insert the upper end of the DIN rail clip into the DIN rail.
2. Push the bottom of the DIN rail clip into the DIN rail.
SCM-1202-218 Version 1.0
® ™
Anybus Communicator - EtherNet/IP to EtherCAT MDevice
Page 13 of 61