Related Manuals for HMS Networks Anybus Ewon Flexy 205
Summary of Contents for HMS Networks Anybus Ewon Flexy 205
- Page 1 ENGLISH Connect Flexy 205 to Internet via Bolt LTE and Bolt Ethernet RJ45 APPLICATION NOTE SCM-1202-180 Version 1.1 Publication date 2021-10-15...
- Page 2 The information in this document shall therefore not be construed as a commitment on the part of HMS Networks and is subject to change without notice. HMS Networks makes no commitment to update or keep current the information in this document.
-
Page 3: Table Of Contents
Connect Flexy 205 to Internet via Bolt LTE and Bolt Ethernet RJ45 Table of Contents 1. Preface ..........................1 1.1. Document Conventions ..................... 1 1.2. Trademarks ........................2 2. Preparation ..........................3 2.1. Required Equipment ......................3 2.2. Support and Resources ...................... 3 3. - Page 4 This page is intentionally left blank.
-
Page 5: Preface
Preface Connect Flexy 205 to Internet via Bolt LTE and Bolt Ethernet RJ45 1. Preface 1.1. Document Conventions Lists Numbered lists indicate tasks that should be carried out in sequence: 1. First do this 2. Then do this Bulleted lists are used for: •... -
Page 6: Trademarks
Helpful advice and suggestions. 1.2. Trademarks ® ® Anybus is a registered trademark and Anybus Wireless Bolt LTE is a trademark of HMS Networks. All other trademarks are the property of their respective holders. Page 2 of 16 SCM-1202-180 1.1... -
Page 7: Preparation
Preparation Connect Flexy 205 to Internet via Bolt LTE and Bolt Ethernet RJ45 2. Preparation 2.1. Required Equipment In this application note we use the following equipment: Equipment Order Code Description Ewon Flexy 205 Flexy20500_00MA Gateway that allows communication with field equipment regardless of the protocol used. -
Page 8: About This Application Note
Connect Flexy 205 to Internet via Bolt LTE and Bolt Ethernet About this Application Note RJ45 3. About this Application Note Figure 1. Flexy 205 connected to the Ethernet Power Injector, Bolt LTE and Bolt Ethernet RJ45 In this application note, we describe how to connect a Flexy 205 to: •... - Page 9 About this Application Note Connect Flexy 205 to Internet via Bolt LTE and Bolt Ethernet RJ45 After you have completed the installation and configuration, you can: • Wirelessly connect any device on the Flexy LAN. • Access your Flexy or visualize custom pages. •...
-
Page 10: Installation
Connect Flexy 205 to Internet via Bolt LTE and Bolt Ethernet Installation RJ45 4. Installation 4.1. Connect the Devices A. Ewon Flexy 205 B. Anybus PoE Injector 12-57VDC C. Anybus Bolt LTE D. Anybus Bolt RJ45 PoE Figure 3. Connect cables Connect cables Connect an Ethernet cable between the Flexy 205 WAN port and the PoE Injector Data IN port. -
Page 11: Configuration
Configuration Connect Flexy 205 to Internet via Bolt LTE and Bolt Ethernet RJ45 5. Configuration 5.1. Connect Bolt LTE to Internet via 4G This procedure describes how to connect Bolt LTE internet via the 4G network. Insert a cellular SIM card in the Bolt LTE SIM card holder. Ensure that the SIM card contact surface is facing towards the Ethernet port. - Page 12 Connect Flexy 205 to Internet via Bolt LTE and Bolt Ethernet Connect Bolt LTE to Internet via 4G RJ45 Bolt LTE IP settings: To access the Bolt LTE built-in web interface, ensure that the Bolt LTE IP address and your computer IP address are within the same IP address range.
- Page 13 Connect Bolt LTE to Internet via 4G Connect Flexy 205 to Internet via Bolt LTE and Bolt Ethernet RJ45 Ethernet Settings: On the Ethernet Settings page, configure the IP Settings: a. IP Address b. Internal DHCP Server, select Enabled. APN Settings: On the Cellular Settings page, configure the APN Settings.
- Page 14 Connect Flexy 205 to Internet via Bolt LTE and Bolt Ethernet Connect Bolt LTE to Internet via 4G RJ45 Reconnect the Ethernet cable to the Flexy 205 WAN port. Page 10 of 16 SCM-1202-180 1.1...
-
Page 15: Connect Flexy 205 To Internet Via Bolt Lte
Connect Flexy 205 to Internet via Bolt LTE Connect Flexy 205 to Internet via Bolt LTE and Bolt Ethernet RJ45 5.2. Connect Flexy 205 to Internet via Bolt LTE This example describes how to use Bolt LTE to connect Flexy 205 to the internet via the 4G network. Procedure Log in to the Flexy 205 built-in web interface. - Page 16 Connect Flexy 205 to Internet via Bolt LTE and Bolt Ethernet Connect Flexy 205 to Internet via Bolt LTE RJ45 On the Ethernet WAN Connection page: Figure 6. IP address and DNS settings To enable the Bolt LTE to assign IP settings to the Flexy 205: a.
- Page 17 Connect Flexy 205 to Internet via Bolt LTE Connect Flexy 205 to Internet via Bolt LTE and Bolt Ethernet RJ45 On the Validate your Internet connection page: To test the internet connection, select the Enable checkbox. Figure 7. Validate internet connection A test of the internet connection is performed and the status is displayed.
- Page 18 Connect Flexy 205 to Internet via Bolt LTE and Bolt Ethernet Connect Flexy 205 to Internet via Bolt LTE RJ45 To Do Next On the Summary page, check the Internet Connection settings. Figure 9. Summary page Internet Connection settings Page 14 of 16 SCM-1202-180 1.1...
-
Page 19: Connect Devices On The Flexy Lan To Wi-Fi Via Bolt Ethernet Rj45
Connect Devices on the Flexy LAN to Wi-Fi via Bolt Ethernet Connect Flexy 205 to Internet via Bolt LTE and Bolt Ethernet RJ45 RJ45 5.3. Connect Devices on the Flexy LAN to Wi-Fi via Bolt Ethernet RJ45 In this example, we have connected a Bolt Ethernet RJ45 to the Flexy 205 LAN port in order to get Wi-Fi access for the devices connected to the Flexy LAN. - Page 20 Connect Flexy 205 to Internet via Bolt LTE and Bolt Ethernet Connect Devices on the Flexy LAN to Wi-Fi via Bolt Ethernet RJ45 RJ45 On the Bolt/AWB configuration page, enter the SSID (Service Set Identifier) and Password that is to be used with the newly created Wi-Fi network.
Need help?
Do you have a question about the Anybus Ewon Flexy 205 and is the answer not in the manual?
Questions and answers