Security Switch - HMS Networks Anybus Communicator User Manual

Security Switch

6.6. Security Switch
IMPORTANT
After completing the configuration of the Communicator, lock the security switch to prevent
unauthorized access to the Communicator built-in web interface.
When the security switch is in its locked position, the Communicator built-in web interface can not be accessed
and the Communicator can not be configured using the built-in web interface. Network specific parameters,
configured via the PLC is still available.
To Lock and Unlock the Security Switch
Figure 12. Security switch in locked and unlocked position
Use a pointed object, such as a ballpoint pen.
• To lock the security switch, push the toggle towards the Communicator front.
• To unlock the security switch, push the toggle towards the Communicator back.
SCM-1202-218 Version 1.0
® ™
Anybus Communicator - EtherNet/IP to EtherCAT MDevice
Page 17 of 61