Table of Contents
Advertisement
Fujitsu VRF systems with KNX, Serial and IP support
5. Hardware
5.1. Mounting
IMPORTANT
Before mounting, please ensure that the chosen installation place preserves the gateway from direct
solar radiation, water, high relative humidity, or dust.
IMPORTANT
Maximum mounting height: below 2 meters (6.5 feet).
NOTE
Mount the gateway on a wall or over a DIN rail. We recommend the DIN rail mounting option,
preferably inside a grounded metallic industrial cabinet.
IMPORTANT
Ensure the gateway has sufficient clearances for all connections when mounted. See
(page
20).
Wall mounting
1.
Press the top side mobile clips in the rear panel until you hear a click.
2.
Use the clip holes to fix the gateway on the wall using screws.
NOTE
Use M3 screws, 25 mm (1") length.
3.
Make sure the gateway is firmly fixed.
Page 8 of 41
Hardware
Dimensions
USER MANUAL Version 1.0.7
Advertisement
Table of Contents
