Table of Contents
Advertisement
Firmware Upgrade Error Management
3.
Leave the Communicator for 10 minutes.
The Gateway status led indicator flashes red and green until the firmware upgrade is completed.
Figure 58. Firmware upgrade LED indication
Result
The Communicator recover and return to normal operation.
Figure 59. Recover and return to normal operation
To Do Next
To check LED status, refer to
SCM-1202-218 Version 1.0
Communicator LED
Indicators.
®
™
Anybus
Communicator
- EtherNet/IP to EtherCAT MDevice
Page 59 of 61
Advertisement
Table of Contents
Related Manuals for HMS Networks Anybus Communicator
Related Products for HMS Networks Anybus Communicator
- HMS Networks AWB1500
- HMS Networks AWB1501
- HMS Networks Anybus Communicator ABC4021
- HMS Networks Anybus Wireless Bridge II CAN AWB3006
- HMS Networks Anybus Wireless Bridge II Serial AWB3015-B
- HMS Networks Anybus North ABC3213-A
- HMS Networks Anybus Communicator ABC3261-A
- HMS Networks Anybus Wireless Bolt Serial AWB2010-B
Need help?
Do you have a question about the Anybus Communicator and is the answer not in the manual?
Questions and answers