®
™
Anybus
Communicator
- EtherNet/IP to EtherCAT MDevice
6.8. DIN Rail Demount
Before You Begin
IMPORTANT
Be careful when removing the Communicator from the DIN-rail. If not removed properly, the DIN rail
locking mechanism and the product cover can break.
Have a flat-blade screwdriver, size 5.5 mm, available.
Procedure
Remove the Communicator from the DIN Rail:
1.
Insert the screwdriver into the Communicator DIN rail locking mechanism.
2.
To unlock the Communicator DIN rail locking mechanism, turn the screwdriver clockwise.
Figure 15. Unlock the Communicator
Page 20 of 61
DIN Rail Demount
SCM-1202-218 Version 1.0