High Level Network Settings; To Use Dhcp Server - HMS Networks Anybus Communicator User Manual

® ™
Anybus Communicator - EtherNet/IP to EtherCAT MDevice

High Level Network Settings

7.6. High Level Network Settings
Configure the EtherNet/IP network settings.

7.6.1. To Use DHCP Server

Figure 23. IP Settings, DHCP enabled
To enable DHCP, select the DHCP enabled checkbox. The IP settings will be provided by the high level network
DHCP server.
Page 30 of 61 SCM-1202-218 Version 1.0