Connect To Ethernet/Ip Network - HMS Networks Anybus Communicator User Manual

Connect to EtherNet/IP Network

6.4. Connect to EtherNet/IP Network
Figure 10. Connect to EtherNet/IP network
1. Connect the Communicator to your EtherNet/IP network.
EtherCAT Connector
To Do Next
Connect the Communicator to the EtherCAT network and to power.
Check LED status, refer to Communicator LED
SCM-1202-218 Version 1.0
®
Anybus
Pin
1
2
3
4
5
6
7
8
Indicators.
™
Communicator - EtherNet/IP to EtherCAT MDevice
Description
TD+
TD-
RD+
Not used
Not used
RD-
Not used
Not used
Page 15 of 61