Clear and Revert Configuration
10.2. Clear and Revert Configuration
You can restore all settings in a configuration to the default settings.
Procedure
Figure 44. Files & firmware page
To Clear the Configuration
When you want to clear a configuration and return to the default settings.
1.
On the Files & firmware page, click Clear.
2.
In the Confirm clear window, click Clear.
3.
To apply the change, click Apply in the web-interface header, and follow the instructions.
To Revert the Configuration
When you want to remove any configuration made in a current session and re-load the configuration from the
gateway.
1.
On the Files & firmware page, click Revert.
2.
In the Confirm revert window, click Revert.
3.
To apply the change, click Apply in the web-interface header, and follow the instructions.
SCM-1202-218 Version 1.0
®
™
Anybus
Communicator
- EtherNet/IP to EtherCAT MDevice
Page 49 of 61