Change Language - HMS Networks Anybus Communicator User Manual

® ™
Anybus Communicator - EtherNet/IP to EtherCAT MDevice

10.4. Change Language

Default language is English.
To change the language of the Communicator built-in web interface:
1. In the Communicator built-in web-interface header, click the Language icon
Figure 47. Language menu
2. Select a new language from the list.
Figure 48. Example: Change language to Swedish
The language change takes effect immediately.
Page 52 of 61
Change Language
.
SCM-1202-218 Version 1.0