Figure 49: System Status Leds 5 Minutes After Power On In Sn2700; Figure 50: System Status Leds 5 Minutes After Power On In Sn2740; Figure 51: System Status Leds 5 Minutes After Power On In Sn 2410 - Mellanox Technologies Spectrum SN2700 Hardware User Manual

Check the System Status LEDs and confirm that all of the LEDs show status lights consis-
Step 4.
tent with normal operation (initially flashing, and then moving to a steady color) as shown
in Figure 49

Figure 49: System Status LEDs 5 Minutes After Power On in SN2700

Figure 50: System Status LEDs 5 Minutes After Power On in SN2740

Figure 51: System Status LEDs 5 Minutes After Power On in SN 2410

50
It may take up to five minutes to turn on the system. If the System Status LED shows
red after five minutes, unplug the system and call your Mellanox representative for
assistance.
below. For more information, refer to "LEDs".
Mellanox Technologies Rev 1.9