Digit Cradle Address Stamping; Cradle Address Stamping - Datalogic PowerScan Series Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

4 Digit Cradle Address Stamping

Set a unique address to the base via service. Configure it with Aladdin or with a terminal
using this command:
where xx are 4 couples of digits (in hex) representing the cradle address.
Example: 1234 = $S,CRF4C31323334.Ar[CR]

Cradle Address Stamping

Enable or disable cradle address stamping.
$CCNAS00
Cradle Address Stamping = Enable
310
POWERSCAN™ PD/PM/PBT9600
$S,CRF4Cxxxxxxxx,Ar[CR]

Cradle Address Stamping = Disable
WIRELESS FEATURES
$CCNAS01