Set Action For F1 In Batch Context; Set Action For F2 In Batch Context - Datalogic PowerScan Series Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Set Action for F1 in Batch Context

Set Action for F1 in Batch Context
$CKFB1
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

Set Action for F2 in Batch Context

Set Action for F2 in Batch Context
$CKFB2
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
262
POWERSCAN™ PD/PM/PBT9600
DISPLAY AND KEYBOARD FEATURES
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left. Choose two digits representing the value in
Table 7 on page 261 from the Alphanumeric charac-
ters in Appendix G, Keypad.
End by scanning the ENTER/EXIT bar code again.
CANCEL
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left. Choose two digits representing the value in
Table 7 on page 261from the Alphanumeric charac-
ters in Appendix G, Keypad.
End by scanning the ENTER/EXIT bar code again.
CANCEL