Action Configuration For Function Keys - Datalogic PowerScan Series Product Reference Manual

CUSTOM STRING FOR DISPLAY LEGEND

ACTION CONFIGURATION FOR FUNCTION KEYS

Configure actions for the function keys.
Table 6 - Default Action Keys
F1
F2
F3
F4
Shift
To configure the following features, follow the procedure below:
1. Scan the ENTER/EXIT PROGRAMMING MODE bar code above.
2. Scan the bar code for the Function Key you want to program.
3. Determine the CMD_ID number from Table 5 on page 256.
4. Scan the corresponding 2 digits from the Alphanumeric characters in
5. End the procedure by scanning the ENTER/EXIT bar code again.
$CKF11
Configures Action for F2
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
16K
07 Backlight
0E Dot char
09 Backspace CMD
08 Clear
10 Shift
.
Keypad
ENTER/EXIT PROGRAMMING MODE
4K
02 String 1
03 String 2
N.A.
N.A.
N.A.
Configures Action for F1
$CKF21
CANCEL
PRODUCT REFERENCE GUIDE
Appendix G,
257