Connection Module Fast Release - Mounting The Bracket - Datalogic PowerScan Series Product Reference Manual

CONNECTION MODULE FAST RELEASE - MOUNTING THE BRACKET

CONNECTION MODULE FAST RELEASE - MOUNTING THE BRACKET
1. Remove the protective strips.
2. Unscrew the connection module from the base station.
3. Screw the mounting plate to the connection module.
2
3
4. Unlock the lever and remove the connection module from the base station.
5. Screw the connection module and mounting plate sub-assembly to a flat surface
using four screws as shown in the figure below.
Screws Position
Screws Position
23
PRODUCT REFERENCE GUIDE