Beep On Ascii Bel; Beep On Not On File - Datalogic PowerScan Series Product Reference Manual

RS-232/USB-COM SETTINGS

Beep On ASCII BEL

When this parameter is enabled, the reader issues a beep when a <BEL> character is
detected on the RS-232 serial line. <BEL> is issued to gain a user's attention to an illegal
entry or other important event.

Beep On ASCII BEL = Disable
$CR2BB01

Beep On Not on File

This option enables/disables the action of the reader to sound a three beep sequence
upon receiving a Not-On-File (NOF) host command.
Beep On Not On File = Disable
$CBPNF01
ENTER/EXIT PROGRAMMING MODE
$CR2BB00
Beep On ASCII BEL = Enable
$CBPNF00

Beep On Not On File = Enable
PRODUCT REFERENCE GUIDE
51