Bluetooth Friendly Name - Datalogic PowerScan Series Product Reference Manual

BLUETOOTH-ONLY FEATURES

Bluetooth Friendly Name

You can set a meaningful name for PBT9600 that will appear in the application during
device discovery.
To set a new Bluetooth Friendly Name, scan the barcode below and follow the instruc-
tions.
Set Bluetooth Friendly Name
$CBTFN
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

POWERSCAN PBT9600 [SERIAL_NUMBER_SCANNER]
ENTER/EXIT PROGRAMMING MODE
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the
bar code at left followed by a maximum 64 digits
from the Alphanumeric characters in
. The digits must be the hexadecimal ASCII
Keypad
representation of the desired characters. If less
than the expected string of 32 characters are
selected, scan the ENTER/EXIT bar code to termi-
nate the string.
CANCEL
Appendix G,
PRODUCT REFERENCE GUIDE
305