Coupon Control - Datalogic PowerScan Series Product Reference Manual

COUPON CONTROL

Coupon Control
This feature is used to control the method of processing coupon labels.
Options are:
•
•
•
To set this feature:
1. Scan the Enter/Exit bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any unused
3. Complete the programming sequence by scanning the Enter/Exit bar code.
$CCPCL00

Coupon Control = Enable only UPC/EAN
$CCPCL02
COUPON CONTROL
Allow all — allow all coupon bar codes to be decoded
Enable only UPC/EAN — enables only UPC/EAN coupon decoding
Enable only GS1 DataBar — enables only GS1 DataBar coupon decoding
bar codes on this and the facing page to ensure that the reader sees only the bar
code you intend to scan.
ENTER/EXIT PROGRAMMING MODE
Coupon Control = Allow all
$CCPCL01
Coupon Control = Enable only GS1 DataBar
PRODUCT REFERENCE GUIDE
133