Table of Contents
Advertisement
6.1 Troubleshooting Guide
The following 'Quick Reference' Troubleshooting Guide may assist in discovering and eliminating
the cause of possible trouble in your Cocoon Fitness Pod unit. Before using the following checklist,
please review SETUP and/or OPERATION procedures for resolving problems. If problems continue
after going through the following 'check points', please refer to SERVICE, electrical schematics
and diagrams, or contact your supplier for additional technical assistance.
Problem
Possible Cause
No
Bad power connection.
Electrical
Power
Incorrect power source.
Blown fuse or circuit breaker.
Machine not turned ON.
BE FIT• BE HEALTHY • BE WELL| 1 800 445-8418 | www.wellness-usa.com
CHAPTER 6 TROUBLESHOOTING
Table 6.1.1. Troubleshooting Guide.
• Secure power connections
to wall receptacle and unit.
• Check connection of Data
Harness from Hood to Base
(located to the right of the
Main Hinge. This is a
common problem after
installation re-assembly)
• Check for proper source
voltage(110 Volts)
• Check amperage of
breaker controlling power
outlet (must be 20- amp)
• Turn ON using main switch
on top of Main Power Box,
under contour bed.
Remedy
Cross
Reference
Please refer
to Section I,
No Power to
the unit.
31
Advertisement
Table of Contents
