Replacing The Heat Sensor Assembly - Wellness Cocoon Fitness Pod Owner's Manual

Salt Tile
Face fan
Figure 7.17.1 Inserting/Removing Face Fan Assembly.
Face Fan Replacement Steps:
Install replacement face fan reversing the steps set forth above. NOTE: Use flat blade screwdriver
to hold grill and fan in place while inserting mounting screws.

7.13 Replacing the Heat Sensor Assembly

Precautions: Be sure to turn unit OFF at main switch or disconnect from power source before going
any further with this procedure.
BE FIT• BE HEALTHY • BE WELL| 1 800 445-8418 | www.wellness-usa.com 51