Table of Contents
Advertisement
3. Never operate this appliance if it has a damaged cord or plug, if it is not working properly or
if it has been damaged.
4. Keep the cord away from heated surfaces.
5. Do not use outdoors.
6. To disconnect, turn power control to the OFF position, then remove plug from outlet.
7.
DANGER: Never use pins or other metallic fasteners with this appliance.
Carefully examine the bed covering before each use. Do not use the appliance if the bed
covering shows any sign of deterioration. Keep dry – do not operate in a wet or moist condition.
8.
WARNING: Temperatures high enough to cause burns may occur regardless of the control
setting.
9.
WARNING: Connect this appliance to a properly grounded outlet only. Please refer to
"Grounding Instructions" in Section 4.5 of this manual.
10. WARNING: Do not cover the infrared heat wings (could cause fire risk).
Please note that the rating plate/serial number plate and safety caution are under bed near
the head area.
11. CAUTION: Risk of electrical shock – do not open the power box or control panel and do not
remove the power box cover. There are no user-serviceable parts inside (refer to qualified
personnel only for service).
12. For infrared emitters, the thermal cut-outs are self-resetting.
3.2 Bed Vibration Massage Motors
The vibration massage motors in your unit are powerful and can be adjusted to low, mild, strong,
intense and maximum vibration. When the motors are run continuously on the two highest settings
(intense/maximum) for 40+ minutes, we recommend a short cool down period between sessions.
Our motors have a temperature sensor that will automatically temporarily shut down the motors
for 5 – 7 minutes when they are used continuously at highest settings (for approximately 45 – 60
minutes straight) to avoid overheating. As a general rule, we recommend allowing a 5 – 7 minute
rest and cool down period every hour of use.
BETTER WELLNESS• BETTER LIFE| 1 800 445-8418 | www.wellness-usa.com
8
Advertisement
Table of Contents
