Wellness Cocoon Fitness Pod Owner's Manual page 14

CAUTION: To prevent electric shock and fire hazard do NOT use any other power source.
ETL Grounding Standards:
According to ETL standards for Motor Operated Massage and Exercise Machines, in category 89,
the Grounding Instructions are:
This product must be grounded. If it malfunctions or breaks down, grounding provides a path of
least resistance for electric current to reduce the risk of electrical shock. This product is equipped
with a cord having an equipment-grounding conductor and grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded in accordance with all
local codes and ordinances. Make absolutely sure that the product is connected to an outlet
having the same configuration as the plug. No adapter should be used with this product. If the
product must be reconnected for use on a different type of electric circuit, qualified service
personnel must make the reconnection.
CAUTION: Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician if you are in doubt as to whether the product is
properly grounded. Do not modify the plug provided with the product – if it will not fit the outlet;
have a proper outlet installed by a qualified electrician.
CAUTION: To prevent electric shock, do not use the polarized plug with an extension cord,
receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.
For installation, strictly observe the following instructions:
• Place the Cocoon Fitness Pod on a level surface, preferably on soft carpet.
• Make sure the cover can be opened without hitting anything. Please refer to the
SPECIFICATIONS for details on the actual dimensions.
Avoid using the Cocoon Fitness Pod under the following conditions:
• Do not install near radiators or in places subject to excessive dust, mechanical vibration,
shock and/or excessive heat.
• Do not block the air inlet of the face fan located at the base.
• If it is located in a cold location, the supporting hood struts may decrease pressure in the
strut chambers, which may cause the hood to drop sharply. For the struts, the operating
temperature range is from 50F to 194F (15 °C to 90 C).
BETTER WELLNESS• BETTER LIFE| 1 800 445-8418 | www.wellness-usa.com
Grounding Instructions
(Save These Instructions)
13