Cleaning The Underbed Area; Cleaning Contact Surfaces (Bed, Head Pillow, Interior Of Shell) - Wellness Cocoon Fitness Pod Owner's Manual

8.4 Cleaning the Underbed Area

The following should be done after every Cocoon Fitness Pod session:
a. Carefully remove bed sections from unit, unplug vibratory bed motor chords from the unit
if necessary.
b. Clean dirt, dust and perspiration from underbed surfaces following directions below.
c. Spray desired surface/area with Oxivir Tb Disinfectant.
d. Let solution sit for 1 minute.
e. Wipe surface dry and clean with a soft cloth or paper towel.

8.5 Cleaning Contact Surfaces (Bed, Head Pillow, Interior of Shell)

1. Use Oxivir Tb Disinfectant on all contact surfaces AFTER EACH USE to present a clean,
sanitary appearance and feel for each new client.
2. Let solution sit for 1 minute.
3. Wipe dry and clean with paper or soft cloth towel.
4. Bed and head pillow could stain over time. For light staining, we recommend using "Soft
Scrub" cleaner and isopropyl alcohol. Spread "Soft Scrub" and alcohol on the bed
surface, let it sit for 5 minutes, then dampen a soft cloth with water and gently rub the area
in circles.
NOTE: Cleaning after each use removes oils, perspiration, and cosmetics. It will also prolong the
material life of the accessories and bed.
CAUTION: Do not spray cleaning solvent on the electrical box cover or power connectors as it
could cause a short circuit.
BE FIT• BE HEALTHY • BE WELL| 1 800 445-8418 | www.wellness-usa.com 56