Installing Bed - Wellness Cocoon Fitness Pod Owner's Manual

One (1) Aromatherapy dish and wire basket/bracket
FitBed resistance tubes:
Two (2) Yellow tubes (2 to 4 lbs resistance)
Two (2) Blue tubes (4 to 6 lbs resistance)
FitBed Handles (2)
One (1) Spare Hinge Flange Screw

4.3 Installing Bed

It is recommended that at least two people perform this task.
Instructional steps for installing the bed:
1. Open hood.
2. Remove bed.
3. Carefully remove the protective plastic from the bed.
4. Locate the electrical cords for the bed vibration motors.
5. Set six (6) balls in ball holes.
6. Stand at the opposite side of the bed facing each other.
7. Set bed gently on the six supporting balls.
8. Lift the head area of the bed and locate the bed prop. Lift the bed prop into position and
lower bed onto it.
9. Plug the cords into the outlet according to the label while the bed prop is holding the bed
up.
10. Make sure the vibration motors are not touching the electrical cords.
11. Lower bed back onto the six supporting balls.
12. Make sure all six balls remain in place for support.
BETTER WELLNESS• BETTER LIFE| 1 800 445-8418 | www.wellness-usa.com 10