Set The Workpiece Origin - WEIHONG NcEditor V12 User Manual

2.4 Set the Workpiece Origin

This operation is used to define the coordinate origin in a toolpath file before
machining.
To set the workpiece origin, do one of the following:
• In drawing window, drag
is at the intersection of horizontal scale and vertical scale:
• Specify the position of the cutting head as the workpiece origin:
1. To move the cutting head to the target position, click X+ / X- / Y+ / Y- in
machine control area.
2. To set the current position as the workpiece origin, click
machine control area or press F5.
• Set the berth point as the workpiece origin:
1. To open Set Origin dialog box, do one of the following:
• In drawing toolbar, click
• In menu bar, click Mach → Set Origin.
Set Origin dialog box pops up:
2. Select a position for the berth point.
3. Optional: Check Auto apply berth point.
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
to the target position.
.
21 / 131
上海维宏电子科技股份有限公司
in